Stripping and Assembling MCQs Quiz | Class 9
Test your knowledge with this quiz for Class 9, Subject: NCC (Code 076), from Unit 5: Weapon Training. This quiz covers basic field stripping/assembly awareness. Answer all the questions, submit your quiz, and download your personalized answer sheet PDF.
Understanding Weapon Stripping and Assembling
Stripping and assembling a weapon are fundamental skills for any NCC cadet. “Stripping” refers to the process of dismantling a weapon into its major parts or groups, while “assembling” is the process of putting it back together. These skills are crucial for routine cleaning, maintenance, and inspection, ensuring the weapon functions reliably and safely.
Key Principles of Weapon Handling
- Safety First: The most important rule is to always ensure the weapon is unloaded before starting any procedure. Treat every weapon as if it is loaded until you have personally verified it is safe.
- Correct Sequence: Weapons are designed to be disassembled and reassembled in a specific order. The sequence of assembling is typically the exact reverse of the sequence of stripping.
- Nomenclature: Knowing the correct name for each part (nomenclature) is essential. It allows for clear communication and a better understanding of the weapon’s mechanism.
- No Force: Parts should fit together smoothly. If you need to use excessive force, it’s likely that a part is misaligned or you are not following the correct sequence. Forcing parts can damage the weapon.
- Cleanliness: The primary reason for field stripping a weapon is for cleaning. Regular cleaning removes carbon buildup, dirt, and moisture, preventing jams and corrosion.
Basic Sequence for Stripping a .22 Rifle
While specific steps vary between different rifle models, a general sequence for a common training rifle like the .22 is as follows:
| Step | Action / Part to be Removed |
|---|---|
| 1 | Perform safety checks to ensure the rifle is unloaded. |
| 2 | Remove the Bolt. |
| 3 | (If applicable) Remove the Magazine. |
| 4 | This level of disassembly is known as ‘Field Stripping’ and is usually sufficient for routine cleaning. |
Quick Revision Points
- Stripping is dismantling; assembling is putting it back together.
- The first step is always to prove the weapon is safe (unloaded).
- Assembling is the reverse process of stripping.
- Familiarize yourself with the nomenclature of all weapon parts.
- Proper cleaning after stripping is essential for weapon reliability.
- After reassembly, always perform a function check (e.g., cocking and trigger action) to ensure it’s working correctly.
Extra Practice Questions
- What is the primary purpose of field stripping a weapon?
a) To modify its parts
b) For routine cleaning and maintenance
c) To make it lighter to carry
d) To show it to others - The knowledge of the names of various parts of a weapon is called:
a) Ballistics
b) Trajectory
c) Nomenclature
d) Assembly - What should be done immediately after reassembling a weapon?
a) Load it with ammunition
b) Store it away
c) Perform a function check
d) Polish the exterior - The sequence of stripping is the _______ of the sequence of assembly.
a) same as
b) reverse of
c) longer than
d) unrelated to - Why should you never force parts during assembly?
a) It can damage the weapon
b) It makes a loud noise
c) It is against the rules
d) It requires too much effort
(Answers to Practice Questions: 1-b, 2-c, 3-c, 4-b, 5-a)
